How much does AC installation cost in Malta?
Maltese retailers publish installed prices for standard split-unit jobs — €490 for a 9k, €539–710 for a 12k, €799–840 for an 18k, VAT included. This article explains what that price assumes and what makes your flat different.

The published prices, exactly as published
A handful of Maltese retailers print an installed price rather than a supply-only price. Those figures are the only honest starting point, so here they are:
| Capacity | Published installed price (VAT incl.) |
|---|---|
| 9,000 BTU | €490 |
| 12,000 BTU | €539–710 |
| 18,000 BTU | €799–840 |
Within the 12k band, the spread is brand, not workmanship: a 12k BTU Hisense high-wall is listed at €539 including VAT, and a Mitsubishi 12k at €710 including VAT. Same job, different box.
Above 18,000 BTU, no Maltese seller we can cite publishes an installed price. We are not going to invent one for a 24k. Units that size are quoted off a survey.
What "installed" means on those listings
The Panta listing is specific, and the specificity is the useful part: the installed price covers a standard installation with roughly 3–4 metres of copper pipe between indoor and outdoor units. Extra metres and extra work are charged separately.
Three to four metres is the back-to-back case. Indoor unit high on an internal wall, outdoor unit directly behind it on the yard side or the back wall, short drill, short drop, done in a morning. Plenty of Maltese apartments are built exactly like that, which is why the published price is a real price and not a teaser.
The jobs that cost more are not jobs where someone has padded the quote. They are jobs where the building asks for more material and more hours.
The six things that move a real job above the sticker
1. Pipe run length. The single biggest variable. Every metre past the standard allowance is more copper, more insulation, more refrigerant handling and more time. A bedroom on the far side of a flat from the only legal outdoor position can easily triple the run.
2. Trunking versus chasing. Exposed PVC trunking is faster and cheaper. Chasing the pipework into a wall and making good is slower, dustier, and involves a second trade for the plastering and paint. Owners who have just finished a renovation rarely want trunking across a new wall; that preference has a price.
3. Core drilling through limestone. Maltese walls are not plasterboard. A clean core through globigerina or through a thick party wall is a specific operation with specific kit, and the thicker the wall the longer it takes. Two or three cores on one job is normal in an older townhouse.
4. A new electrical circuit. Shell form is the standard way property is sold here, so plenty of homes have a distribution board that was never designed around three or four condensers. If the circuit, cabling and protection for the unit do not already exist, they have to be installed, and that is electrical work priced on its own terms, not part of an AC sticker price.
5. Height and access to the outdoor unit. A condenser that sits on a flat roof reached by an internal staircase is a different job from one that has to be bolted to a wall three storeys up over a shaft. Scaffolding, lifting, roped access, or simply two technicians instead of one all show up in the figure.
6. Where the law lets you put the outdoor unit. See below — this is the Maltese one that catches arrivals.
The DNO rule that decides your pipe run
Under the Development Notification Order, S.L. 552.08, Schedule Class 2(ix), air-conditioning units are permitted development unless the unit is located on any façade that faces a road, or is visible from a road.
Read that twice, because it is the rule that quietly sets your cost. If the obvious spot — the one two metres from the indoor unit — is on the street elevation or can be seen from the street, it is outside permitted development. The usual resolution is to relocate the condenser to a back yard, an internal shaft, a roof set back from the parapet, or a flank that is genuinely not visible from the road. Every one of those relocations means a longer pipe run, more trunking, more cores and sometimes a crane-adjacent access problem.
So the planning rule and the price are the same question. A survey that does not look at where the unit can legally go is not a survey.
Apartments: the walls are not yours
In a Maltese condominium, external walls and the roof are common parts. There is no air-conditioning clause that makes them an exception. In practice that means the condominium — not just you — has an interest in where a condenser is fixed, how the pipework crosses the façade, and whether existing units have set a precedent. Settle it before anyone books a date. A unit removed after installation is paid for twice.
Gozo
Every unit, every bracket and every length of copper for a Gozo job crosses on the ferry, and so does the van. Whether that lands as a line item, a longer lead time or neither depends on who is doing the work. Nobody publishes a figure for it, and we will not pretend one exists.
How to get from a published price to your price
- Work out the capacity the room actually needs — our cooling load calculator is the quickest way to stop guessing between 9k and 12k.
- Take the published installed price for that capacity as your floor, not your estimate.
- Measure the real distance from the indoor position to the only legal outdoor position, and check that position against the façade rule above.
- Check whether a dedicated circuit already exists.
- Then ask for a survey. Details of what the installation itself involves are on our split AC installation page.
Every job here is surveyed by us. It is then delivered either by us as the contractor, with F-gas certified technicians, or by a vetted partner who contracts with you directly. Either way you know which before you commit, and the survey is what turns the published numbers above into a figure that holds.
Common questions
- What does an installed price of €539 actually include?
- On the published Panta listing for a 12k BTU Hisense high-wall unit, €539 including VAT covers the unit and a standard installation with roughly 3–4 metres of copper pipe between the indoor and outdoor units. The listing states that extra metres and extra work are charged on top. It does not cover a new electrical circuit, long trunking runs, difficult access to the outdoor unit position, or anything structural.
- Why is a 12k unit quoted anywhere from €539 to €710 installed?
- Because the brand and model change, not the labour. The published Maltese installed prices show a 12k BTU Hisense high-wall at €539 including VAT and a Mitsubishi 12k at €710 including VAT. Both are standard installations. The gap is equipment, which is also where efficiency and warranty differ.
- Do I need a permit to put an air conditioner on my façade?
- Under the Development Notification Order, S.L. 552.08, Schedule Class 2(ix), air-conditioning units are permitted development — except where the unit is located on a façade that faces a road or is visible from a road. That exception is what catches most Maltese townhouses and street-front apartments, and it is a planning question to settle before the installer books a date, not after.
- How much does a 24,000 BTU installation cost?
- We do not have a published Maltese installed price for a 24k unit, so we are not going to print one. The published figures we can stand behind stop at 18k. Anything larger is quoted from a survey.
What we could not establish
- No Maltese supplier publishes an installed price for a 24,000 BTU or larger split unit, so no reliable sticker figure exists for that size.
- No published per-metre rate exists for extra copper pipe, trunking, core drilling or an additional electrical circuit — the Panta listing says extras are charged but does not state the rates.
- The sources do not establish what a condominium or administrator may require before works on a common external wall, nor what consent documentation is normally asked for.
- Nobody publishes a Gozo surcharge, or whether one applies at all, despite every delivery crossing on the ferry.
Sources
- 12k BTU Hisense high-wall air conditioner — Panta · read 2026-10-18
- Development Notification Order, S.L. 552.08 — legislation.mt · read 2026-10-18
Drafted with Claude — claude-opus-5, then read, corrected and approved by Neil Bennett before publication. We do not publish anything a person has not read.
Want this costed properly?
The calculator gives you a figure in a minute. A site visit gives you a fixed price.
Book a free survey